Motorcycle & Bicycle Tools

• Features width adjustment from 180 to 280mm, making it suitable for almost all sports bikes. 
• Design ensures rim and tyre protection at all times. 
• Once the bike is supported, allows easy removal and cleaning of front wheel. 
• Please note all front paddock stands need to be used in conjunction with a suitable rear stand to ensure bike stability (See Model No's RPS1 or ARPS1).

• Manufactured from strong, durable yet lightweight aluminium.
• Provides safe and easy ramp access for single/inline wheeled vehicles.
• Suitable for loading/unloading motorbikes or wheelbarrows from vans or trailers.
• Features hooks at one end to help secure ramp while in use.
• Folding design allows compact storage when not in use.

• Used to check and adjust the alignment of the lasers on Model No. MS070 Motorcycle Wheel Laser Aligner.
• This unit will allow workshops to check and adjust in-house.
• Supplied with comprehensive instructions.

• Brand : Sealey
• Double end wrench suitable for use with 6 & 8mm round jets. 
• Single end wrench for use on 6mm hex jets.

• Designed to loosen and tighten the lock nut for the removal and installation of a motorcycle clutch. 
• Manufactured from heavy-duty heat treated steel. 
• Suitable for use on Honda motorcycles with 20 or 24mm lock nuts.

Model no: VS1818

• Quality drop-forged and tempered alloy steel with flat rounded tip.
• Moulded handle enables extra grip.
• Suitable for use with motorcycle, small agricultural or leisure tyres.
• Length: 300mm 
• Width: 28mm

• Manufactured from heat treated steel.
• Designed to remove lock nuts from motorcycle flywheels quickly and safely.
• Suitable for a variety of motorcycles.

• Heavy-duty drop-froged and tempered steel with a phosphate finish for anti-corrosion resistance.
• Curved rounded tip for ease of use when rolling round the rim.
• Machine finished alloy handle enables extra grip and control when in use.
• Suitable for use on motorcycle, small agriculture or leisure tyres

Model no: TC965

• Manual type tyre changer suitable for wide variety of tyres and wheels including those fitted to motorcycles, quad bikes, go-karts and golf buggies.
• Works on bearing or hub centred wheels and is supplied with two centre posts.
• Includes manual bead breaker and supplied with tyre bar for mounting and de-mounting.
• Fast and simple operation.
• Supplied with operating instructions.
• To prevent damage to the rim of alloy wheels, it is essential to use an appropriate tyre bar.

• One man bleeding/servicing of hydraulic brakes and clutches.
• The kit utilises a small non-return valve and two connector hoses that attach to the scooter or motorcycle bleed nipple.
• As the brake/clutch are bled the valve prevents the used fluid and air being drawn back into the system.

• Extract brake caliper pistons without risk of damage to outer face of piston.
• Fast and simple operation.
• Clamp screw allows pliers to be fixed into cup of piston for added pulling power.

• Accurate tool for correct alignment of the chain and sprocket.
• Helps prevent wear to the chain and sprockets.
• Brand : Sealey
• Model :MS005

• Ideal for protection, rain or shine, against weathering and fading.
• Double layer cover for extra protection.
• Inner layer is made from soft anti-scratch material to protect motorcycle's paintwork.
• Has a clear PVC pocket to accept Model No. SPP01 solar panel (requires Model No. SPP01.A adaptor) to enable battery charging while cover is fitted to the motorcycle without the need for mains power supply. 
• Elastic corners with strap and buckle for easy and secure fitting.
• Eyelet enabling wheel lock to be fitted.
• Supplied in a storage bag.

• Motorcycle dolly holds a single motorcycle or sport bike with a side stand, weighing up to 565kg.
• Easy manoeuvring around the workshop or garage.
• Front and rear lever operated wedge gates allow for easy loading and unloading. 
• Five position side stand platform to fit varied length side stands.
• Front/rear steel pins to keep the motorcycle on the dolly during moving, and smooth rolling dual castor wheels.

• Lifts and stabilises the front or rear of any dual sided swingarmed bike quickly and easily.
• Supplied with width and angle adjustable rubber support pads and bobbin supports, front lifting pin type supports and interchangeable handles.
• All supports mounted on heavy-duty box section for continuous professional use.
• Please note if using as a front paddock stand, needs to be used in conjunction with a suitable rear stand to ensure bike stability
• Part Number : RPS6
• Item Weight : 7 Kg
• Product Dimensions : 33 X 48.5 X 12 cm
• Item Model Number : RPS6
• Item Package Quantity : 1
• Batteries Included : No
• Batteries Needed : No

• Lifts and stabilises the front or rear of any dual sided swing armed bike quickly and easily.
• Supplied with width and angle adjustable rubber support pads, front under fork supports and interchangeable handles.
• Adjustable lifting height.
• All supports mounted on heavy-duty box section for continuous professional use.
• Please note if using as a front paddock stand, needs to be used in conjunction with a suitable rear stand to ensure bike stability.

• All steel construction with air motor powering the hydraulic pump.
• Safety lock device for preventing accidental lowering and front wheel clamp assists to secure motorcycle.
• Only suitable for motorcycles with a centre stand.
• Support platform fitted with full width loading ramp.
• Base assembly fitted with transport wheels and lock-downs to prevent lift from moving during use.

• All steel construction with heavy-duty, foot operated, integral hydraulic pump and ram assembly.
• Fitted with platform safety lock device to prevent accidental lowering.
• Sliding panel platform and front wheel clamp assist removal of rear motorcycle wheel.
• Support platform fitted with full width loading ramp.
• Base assembly fitted with transport wheels.
• Suitable for use with centre stand motorcycles or with paddock stand.
• Model No. MC401

• Used to prevent piston ring damage while inserting pistons into the cylinder head. 
• Easily removed when cylinder is in place. 
• Tool supplied with four ring clamps ranging from Ø40-85mm. 
• Will fit most engine sizes.

• Fitted with two heavy-duty rollers providing access to chain and wheel cleaning while motorcycle is stationary. 
• Small lightweight design ideal for use in tight spaces. 
• Manufactured with non-slip base and loading ramp to easily position wheel onto rollers.

• Sealey MS066 Motorcycle Storage Shelter Medium, Made with 600D polyester Oxford waterproof material.
• Easy to assemble and use.
• When shut can be locked with a padlock (not included).
• Free standing or can be bolted to a hard surface (bolts not included).
• Supplied with soft ground anchors.
• Will fit most standard motorcycles and cruisers.

• Universal tool works on a variety of motorcycles.
• Aids the straight installation of the swingarm needle bearings.
• Supplied with 3 drivers and 3 plates.
• Not suitable for use with impact tools.

• Water/oil resistant full tank cover ideal for protection while working on motorcycle.
• Double layer cover for extra protection.
• Inner layer is made from soft non-slip material.
• Features anti-scratch material to protect tank paintwork.

• Suitable for most motorcycle engines.
• Features two sizes of threaded adjusters for increased applications and five sizes of interchangeable jaws.
• Capacity: Ø50-170mm.
• Throat Depth: 120mm.
• Supplied in carry-case.

• Scissor support stand suitable for use either on a motorcycle lift or on the floor.
• Supplied with sliding pin carriers and three pairs of support pins.
• Raise by hand or with a 22mm spanner/socket.

• Hex nut driver, screwdriver and hex bits with extension, two adaptors, ratchet T-bar handle and combined T-bar and in-line handle. 
• Bits are satin finish chrome plated for resistance to corrosion. 
• Contents: Bits: 175mm Ball-End Hex; 3, 4, 5, 6mm, 175mm Double Ended Slotted; 4.5 x 6.5mm, Phillips/Pozi; #PH1 x PH2, PZ1 x PZ2, PH3 x PZ3, 180mm Hex Nut Driver; 5, 6, 7, 8, 10, 11, 12, 13mm. Adaptors: 1/4"Sq x 1/4"Hex, 3/8"Sq x 1/4"Hex. Extension: 1/4"Hex x 175mm. Handles: Combined T-Bar and In-Line, T-Bar Ratchet. 
• Supplied in composite carry-case.
• Model No. AK6154 

• Brand : Sealey 
• Bench mounting manual bead breaker, especially suitable for motorcycle tyres.
• Lever action with parallel linkage keeps head at the optimum angle for breaking the bead.

• For easy removal of wheel bearings.
• Covers sizes from 10-25mm so will suit most popular motorcycles and ATV/Quad Bikes.
• 2 Drift Shafts: 250, 400mm.
• 7 Assorted Seal Collets: Ø10, 12, 15, 17, 19, 20, 25mm.

• Strong, elastic bungee cord net.
• Ideal for securing awkward items such as helmets and luggage while in transit.
• Fitted with eight hooks to provide a secure hold.
• Suitable for all motorcycles, scooters, mopeds and quad bikes.

• Manufactured from Chrome Vanadium steel
• In Y-shape design ideal for spinning.
• Fitted with 3 popular socket sizes
• Suitable for a range of maintenance jobs on motorcycles.
• Model No. MS001