Brands

Characteristic :

CHARACTERISTIC :

CHARACTERISTIC :

Drop-forged Chrome Vanadium steel C type spanners with bi-hexagonal ring.
Fully polished mirror finish.
Hardened , tempered and nickel chrome plated for corrosion resistance.
Size: 10 X 11, 12 X 13, 14 X 15, 16 X 17, 18 X 19

Drop-forged Chrome Vanadium steel C type spanners with bi-hexagonal ring.
Fully polished mirror finish.
Hardened , tempered and nickel chrome plated for corrosion resistance.
Size: 10 X 11, 12 X 13, 14 X 15, 16 X 17, 18 X 19

Drop-forged Chrome Vanadium steel flare nut spanners.
Fully polished mirror finish.
Hardened, tempered and nickel chrome plated for corrosion resistance.
Flare type jaw design suitable for most common compresion joint fittings.
Size: 8 X 10, 10 X 11, 13 X 14, 15 X 17, 16 X 18

Drop forged Chrome Vanadium steel, offset at 15deg.
Fully polished mirror finish. Hardened, tempered and nickel chrome plated for corrosion resistance.
Useful for etching in confined space.

5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,32mm

Drop forged Chrome Vanadium steel, offset at 15deg.
Fully polished mirror finish. Hardened, tempered and nickel chrome plated for corrosion resistance.
Useful for etching in confined space.
Sizes & Lengths: 6 X 7 = 173 mm; 8 X 9 = 185 mm; 10 X 11 = 200 mm; 12 X 13 = 215 mm; 14 X 15 = 230 mm; 16 X 17 = 245 mm; 18 X 19 = 265 mm; 20 X 22 = 292 mm; 21 X 23 = 320 mm; 24 X 27 = 330 mm; 25 X 28 = 340 mm; 30 X 32 = 370 mm

Drop forged Chrome Vanadium steel, offset at 15deg.
Fully polished mirror finish.
Hardened, tempered and nickel chrome plated for corrosion resistance.
Sizes & Lengths: 6 X 7 = 97 mm; 8 X 9 = 102 mm; 10 X 11 = 112 mm; 12 X 13 = 128 mm; 14 X 15 = 145 mm; 16 X 17 = 165 mm; 18 X 19 = 184 mm; 20 X 22 = 203 mm; 21 X 23 = 215 mm; 24 X 27 = 228 mm; 25 X 28 = 240 mm; 30 X 32 = 254 mm

• Three-jaw design evenly distributes pulling forces to slide gears, pulleys, and flywheels off shaft without damage
• Universal 8-position reversible jaws offer inside or outside grip and short, standard, long or extra long reach
• High-strength forged and hardened steel jaw arms
• Cold rolled, acme-threaded steel drive screw for smooth operation even under high stress
• Jaw Spread: 10-1/2 in.; Jaw Reach: 6-1/4 in.

• Three-jaw design evenly distributes pulling forces to slide gears, pulleys, and flywheels off shaft without damage
• Universal 8-position reversible jaws offer inside or outside grip and short, standard, long or extra long reach
• High-strength forged and hardened steel jaw arms
• Cold rolled, acme-threaded steel drive screw for smooth operation even under high stress
• Jaw Spread: 8-3/4 in.; Jaw Reach: 4-3/4 in.

• Three-jaw design evenly distributes pulling forces to slide gears, pulleys, and flywheels off shaft without damage
• Universal 8-position reversible jaws offer inside or outside grip and short, standard, long or extra long reach
• High-strength forged and hardened steel jaw arms
• Cold rolled, acme-threaded steel drive screw for smooth operation even under high stress
• Jaw Spread: 6-1/4 in.; Jaw Reach: 2-1/2 in.

• Three-jaw design evenly distributes pulling forces to slide gears, pulleys, and flywheels off shaft without damage
• Universal 4-position reversible jaws offer inside or outside grip and short or long reach
• High-strength forged and hardened steel jaw arms
• Cold rolled, acme-threaded steel drive screw for smooth operation even under high stress
• Jaw Spread: 4-1/2 in.; Jaw Reach: 1-1/2 in.

• Jaws are designed with drop forged steel for maximum strength
• This gear puller set is designed for multiple applications
• Shallow, deep, inner and outer grip positions
• Comes pregreased to use right out of the box

• Two-jaw design slips into tight spaces to pull gears, pulleys, and flywheels off shaft without damage
• Universal 8-position reversible jaws offer inside or outside grip and short, standard, long or extra long reach
• High-strength forged and hardened steel jaw arms
• Cold rolled, acme-threaded steel drive screw for smooth operation even under high stress
• Jaw Spread: 8-3/4 in.; Jaw Reach: 4-3/4 in.

• Two-jaw design slips into tight spaces to pull gears, pulleys, and flywheels off shaft without damage
• Universal 8-position reversible jaws offer inside or outside grip and short, standard, long or extra long reach
• High-strength forged and hardened steel jaw arms
• Cold rolled, acme-threaded steel drive screw for smooth operation even under high stress
• Jaw Spread: 6-1/4 in.; Jaw Reach: 2-1/2 in.

• Jaws are designed with drop forged steel for maximum strength
• This gear puller set is designed for multiple applications
• Shallow, deep, inner and outer grip positions
• Comes pregreased to use right out of the box

Wire Stripper & Cutters with spring and screw gauge adjuster and PVC cushioned grips, for wires and cables. Comfortm molded grip plastic handles. Sharp long-life hardened steel blades.

Spring-loaded return blades - No more fiddling around re-opening the jaws again and again after cutting or stripping your wire. The return springs do it for you.

Specifications:

• 5" Miniature Adjustable Stripper/Cutter
• Suitable for 10 - 30 AWG Wire
• Hardened-steel Blades
• Dimensions: 1 1/2"(W) x 5"(H) x 3/16"(L)

• Forged and quenched hardened body in chrome vanadium steel
• Knurled handles
• Raised surface on male handle prevents jamming of fingers

• The essential oil can, updated with long flex-spout for better lubricant placement 
• Good lubricant capacity without being cumbersome 
• Over-sized handle with easy thumb-pump trigger 
• Corrosion-resistant powder coat finish

• Model: VST020
• The essential oil can, updated with long flex-spout for better lubricant placement 
• Good lubricant capacity without being cumbersome 
• Over-sized handle with easy thumb-pump trigger 
• Corrosion-resistant powder coat finish

• Oil filter strap wrench.
• Drop-forged still body with hanging hole.
• Rubberised strap.

• Oil filter band wrench.
• Steel strap with minimal risk of damage.
• Remove filter with minimal risk of damage.

• Oil filter chain wrench.
• Heavy duty chain.
• Enables ratcheting action making it possible to re-grip without removal from filter.

• Heavy-duty chrome vanadium construction.
• Allows even compression of spring prior to installation
• Allows safe compression of spring prior to installation

• Quality construction with sprung steel wraps.
• Supplied with steel key.
• Quality construction with ratchet action tension mechanism.

• A unique tool to strip & cut insulation on copper wire ranging from 0.5mm to 2.5mm or 6mm diameter.
• Suitable fro electronics, aviation automobile.
• For day to day maintenance.

• Well shaped, curved claw is tapered for maximum grip & higher leverage when gripping a nail. 
• Special bonding process ensures that the head never gets loose from the handle.
• Ergonomic rubber grip handle absorbs shock & vibration reducing fatigue.

• Finely serrated taper nose jaws for gripping and maneuvering in confined spaces.
• Manufactured from drop-forged, heat treated steel.
• Ideal for terminal loop forming and wire manipulating.
• Induction hardened jaws and collars

• Well shaped, curved claw is tapered for maximum grip & higher leverage when gripping a nail. 
• Special bonding process ensures that the head never gets loose from the handle. 
• Ergonomic rubber grip handle absorbs shock & vibration reducing fatigue.

• Model: MH25
• Used as a multi-purpose striking tool in most assembly applications 
• Including engineering, furniture making and shopfitting
• Including partitioning, double glazing and injection moulding operations.

• Well shaped, curved claw is tapered for maximum grip & higher leverage when gripping a nail. 
• Special bonding process ensures that the head never gets loose from the handle. 
• Ergonomic rubber grip handle absorbs shock & vibration reducing fatigue.

• Used as a multi-purpose striking tool in most assembly applications 
• Including engineering, furniture making and shopfitting 
• Including partitioning, double glazing and injection moulding operations.

• A multi-purpose tool for gripping, twisting and cutting.
• Polished finish. Manufactured from drop forged, heat treated steel.
•  Heat treated flat jaws serrated for firm grip and rounded jaw section for gripping pipes, tubes uneven objects.
• Induction hardened cutter for cutting steel wires and a side notch cutter for clean cutting of soft wore.
• Size: 6″

• Used as a multi-purpose striking tool in most assembly applications 
• Including engineering, furniture making and shopfitting 
• Including partitioning, double glazing and injection moulding operations.

• Made from special tool steel.
• Professional quality for heavy-duty use.
• Good wear resistance and balance.
• Cutting edge induction hardened
• Size: 7″

• Used as a multi-purpose striking tool in most assembly applications 
• Including engineering, furniture making and shopfitting 
• Including partitioning, double glazing and injection moulding operations.

• Model: CS0819
• Drop forged Chrome Vanadium steel, offset at 15deg.
• Fully polished mirror finish.
• Hardened, tempered and nickel chrome plated for corrosion resistance.
• Useful for etching in confined space.
• Sizes: 6 = 100mm; 7 = 110mm; 8 = 120mm; 9 = 130mm; 10 = 140mm; 11 = 150mm; 12 = 160mm; 13 = 170mm; 14 = 180mm; 17 = 210mm; 19 = 230mm
• FREE: Winsir 2 Layer Tools Box; a strong 2-layer plastic tool box to organize all your various tools neatly. Built tough to last a long time. One inner removable tray, suitable for multi-purpose usage, ideal for handyman, carpenters, mechanic & etc.

• Model: RS0632
• Drop forged Chrome Vanadium steel, offset at 15deg.
• Fully polished mirror finish. Hardened, tempered and nickel chrome plated for corrosion resistance.
• Useful for etching in confined space.
• Sizes & Lengths: 6 X 7 = 173 mm; 8 X 9 = 185 mm; 10 X 11 = 200 mm; 12 X 13 = 215 mm; 14 X 15 = 230 mm; 16 X 17 = 245 mm; 18 X 19 = 265 mm; 20 X 22 = 292 mm; 21 X 23 = 320 mm; 24 X 27 = 330 mm; 25 X 28 = 340 mm; 30 X 32 = 370 mm
• FREE: Winsir 2 Layer Tools Box; a strong 2-layer plastic tool box to organize all your various tools neatly. Built tough to last a long time. One inner removable tray, suitable for multi-purpose usage, ideal for handyman, carpenters, mechanic & etc.